REDON RAPID Sintering Furnace uses highly stable Kanthall® Super HT elements specifically designed for dental operations and pure molybdenum-disilicide heating elements speciﬁcally designed for dental restorations.
The furnace can reach 1500°C in 30 minutes. The cooling phase is regulated to avoid harming your work/heating elements. Running program cycles resume after power failure recoveries.
The cooling stage is software controlled to prevent cracks in zirconia.
There are 100 programmable slots for defining your custom cycles. Each program has 4 stages for the heating/cooling cycle.
Cycles resume in case of power outage.
The lift can hold two sintering trays which can hold up to 80 units or 9 bridges.
|Time to Reach the Max. Temperature||Min. 30 Minutes|
|Heating Speed Max.||56 °C/min.|
|Chamber Volume||0,6 l.|
|Size||37 x 46 x 67 cm|
|Sintering Tray||Ø110/40 mm|
|Temp. Accuracy at 1500°C||+/- 3 °C|
|Voltage Range||220-230 V ~ 50 Hz|
|Heat Rate (0-56°C/min)|